Wood power plant CW1800-500

SYNCRAFT is your professional partner for wood power plants. The table below shows the technical data of the SYNCRAFT wood power plant CW1800-500.

Technical data

Electrical power 500 kW
Thermal power 90 °C 740 kW
Thermal power ~50 °C (2) 250 kW
Fuel heat capacity 1,808 kW
Fuel demand (dry) 362 kg/h
Specific fuel demand (dry) 0.72 kg/kWh el
Premium charcoal 4.5 m³/d
Space for generator (3) appr. 120 m²
Space for engine (3) appr. 55 m²
Fuel quality Wood chips; G50, W50 (4), with fine fraction and bark
Tabelle wischen

(1) ... expandable to an electric output of up to 280 kW
(2) … with optional upgrade for low-temperature usage; temperature is subject to seasonal fluctuations
(3) ... customer-specific adaptation possible
(4) … <W10 in front of the gas generator inlet; drying is ensured by adding the optional upgrade

 

As a general contractor, we cover on request also topics like drying, moving floor and the biomass feeding system for you.

For detail information please contact: office@syncraft.at

2To use the resulting low-temperature heat, a heat pump can be offered optionally to reach a water temperature of up to 55°C. This temperature can be optimally used for biomass drying or to increase the backflow-temperature of the district heating system.

Contact us for further information

contact us now

As a general contractor, we cover on request also topics like drying, moving floor and the biomass feeding system for our customers. For detail information please contact: office@syncraft.at

To use the resulting low-temperature heat, a heat pump can be offered optionally. Depending on the design, a thermal power of up to 200 kW is available (at a water temperature of up to
55 °C). This temperature can be optimally used for biomass drying or to increase the backflow-temperature of the district heating system.

Charcoal

CHARCOAL in high quality is the third valuable product of our wood power plants. From an economic point of view, our investments therefore generate revenue where expenditure would be expected in other systems. From the ecological point of view, charcoal, properly applied, enables long-term storage of fertiliser substances in the soil. This means that the use of fertilisers can be minimised in the long term. Our charcoal is also used as an animal feed supplement and as BBQ charcoal.

Power

POWER is the core product of each of our wood power plants. SYNCRAFT wood power plants generate approximately 0.3 kW electricity from 1 kW fuel. Our wood power plants do not require any additional fuel to generate electricity from the gas engine. In addition, despite high energy output, the emission values in all areas remain significantly below the expected limit values. Absolutely free from fine dust, base load and part-load ready and resistant against dark doldrums.

Heat

HEAT may be only a by-product of our wood power plant, but it is nevertheless the largest output in terms of the amount of energy produced. SYNCRAFT wood power plants, generate up to 0.62 kW of heat from 1 kW of fuel. We work closely with our customers to create bespoke heat utilisation profiles matching their individual needs and requirements.